Instructions
Table Of Contents
- 3DWOX 5x/7x/ USER MANUAL
- Safety Instructions
- Before use
- Prohibition and limitation
- Contents
- Before using the Machine
- Chapter 1 Preparations forMachine Operation
- Chapter 2 UI Menu Function
- Chapter 3 Printing
- Chapter 4 Printed Output Check
- Chapter 5 Maintenance
- Chapter 6 Appendix
- Notice to Users
Appendix
6-6
6
2.2 Installing from the top
Important
-
In the case of the 5X model, follow the “Installing from the front” procedure because installing from the
top is not possible.
-
Referring to the enclosed “Spool stand instructions,” install the spool stand at the top of the machine,
then carry out the following procedure.
1
Open the top door, and remove the tube guiding rod.
2
Pull the snap rings out from the nozzles, then pull the tubes out.
TUBE
TUBE HOLDER
SNAP-RING