Instructions
Table Of Contents
- 3DWOX 5x/7x/ USER MANUAL
- Safety Instructions
- Before use
- Prohibition and limitation
- Contents
- Before using the Machine
- Chapter 1 Preparations forMachine Operation
- Chapter 2 UI Menu Function
- Chapter 3 Printing
- Chapter 4 Printed Output Check
- Chapter 5 Maintenance
- Chapter 6 Appendix
- Notice to Users
UI Menu Function
2-22
2
Z Offset
※ After bed leveling, it is highly recommended to check the z-offset.
This Menu allows user to control the GAP in between Nozzle and BED. Standard is 0.25mm and can be customi
zed. [+] button widens the GAP, [-] button shortens the GAP.
※ For higher adhesive strength between the print output and the bed, shorten the distance of the z-offset.
For less adhesive strength, widen the distance of the z-offset.
1 From home screen press [Setting].
2 Press the [Z Offset] button to access Z Offset screen.
3 Select the nozzle that you will use to adjust the gap.
Default value is 0.25mm, Use [+], [-] buttons to move in 0.05 mm unit.