Product Info

Maintenance
5-8
5
1.5 LCD Protective Glass
The LCD protective glass is made of transparent glass to pass through LED beam with maximum efficiency.
In addition, it prevents external dust or resin from penetrating inside the machine.
For the best printing performance, it is very important that the LCD protective glass, through which the LED
beam passes, is not scratched or contaminated. If the glass is damaged or contaminated, the LED beam
may be cut off or diffused, resulting in print quality degradation or print failure.
In case of a print quality issue or print failure, check the status of the LCD protective glass, and clean it if necessary.
Caution
- Wear clean nitrile gloves before starting cleaning.
1 Removing the platform
Remove the platform to avoid dropping resin or other contaminants on it.
Open the orange cover, and remove the two platform locking knobs to take out the platform from the
machine.
2 Removing the resin tank
Release the locking handles, and then lift it up.
Caution
- If the resin tank is still filled with resin, be careful not to drop or splash resin when you remove it
from the tank or try to move it.