User's Manual

Before Using the Machine
4
Caution
Electric Shock
- Contact with this part may result in electric shock.
- To avoid electric shocks, follow the instructions below.
󱇱
Proceed your work after turning off the machine and unplugging the power cord
from the outlet in case of accessing the system board, or installing hardware or optional
memory devices.
If some other device is connected with the machine, turn the machine off and separate
the cables from the machine.
󱇱
This product has been designed, tested and approved to meet strict safety requirements of
international safety standards.
Some safety features of the parts may not be guaranteed.
We are not liable for problems caused by unauthorized uses of inauthentic spare parts or
consumables.
󱇱
Be sure to turn off the power and unplug the power cord before cleaning inside and outside of
the machine to prevent electrical hazards.
󱇱
When checking the machine, unplug the power cord from the outlet first.
Caution
SLA Resin
- Nitrile gloves should be worn in case of handling resin to preventing contact with resin.
- Wearing protective glass is strongly recommended to prevent splashing of resin into eyes.
- Be careful not to let resin accidentally enter inside the body through nose or mouth.
Caution
Internal UV radiation
- Typical Wavelength : 405 nm
- Risk group of internal LED Module : 2 or 3
- This machine is classified as exempt group per IEC 62471 : This means the machine dose
not produce hazardous UV Lradiation
Orange cover cuts off internal UV radiation to protect users from exposure to risk group
2 or 3 UV radiation.
Be careful not to cause damages such as cracks or breakage to orange cover due to impact.
If orange cover is cracked or broken, stop using the device immediately and contact a local
service center for repair.
LED Unit
Orange cover