User's Manual

9
Before Using the Machine
5.1 SLA Resin (Photo Curable Resin)
Please be cautious of the followings when handling Resin.
- Wear nitril gloves all the time while handling the resin.
- Resins being used for this machine should not be used for the food, drink and medical purposes.
- Do not eat or inhale resin in any forms.
Be careful not to let the resin enter your body through eyes or nose.
- Do not expose the resin to heaters or stoves, direct sunlight, ultraviolet rays, inert gas and oxidizing agents.
- Resin is vulnerable to various lights such as sunlight, fluorescent lamp, LED bulb.
Do all the works on the resin, such as printing, post-processing, cleaning, etc., in a dark place with no
light. If the working place requires some lights, please use a UV protection film on the light to weaken
the light intensity.
- Do not use touch screen with hands or any tools contaminated with resin. Touch screen may
malfunction if it is covered with resin.
- If storing the remaining resin is necessary, resin must be cleaned remove dirt, plastic debris, etc by
filtering. Use dedicated container to store resin and seal the cap firmly.
- If resin is stored in the resin tank, it can be cured or color dye can be separated. Stir the resin with
a rubber scrapper or spatula in every 24hours to mix it up well. If resin tank is damaged due to improper
resin tank management, manufacture will not take a responsibility.
- Resin in a liquid form is not a general waste and should not be poured into drains. It must be disposed
of by a designated waste disposal company.
If difficult to dispose it by a waste disposal company, please dispose of it after pouring it in a transparent
plastic bag and curing it by exposing to sunlight or UV light.
Cured resins can be disposed with other normal garbage.
- Be careful not to get any resin on the parts other than the resin tank, platform and inside the machine.
This may cause malfunction or malfunction of the unit.
Important
- Please note that you shall follow our technical information or support being described in this manual at
your own discretion and risk.
- We are not responsible for the use and handling of resin other than those described in this manual.
- Resin specifications can be changed without any notice.