User's Manual

2-13
UI Menu Function
2
Caution
- If you select [On] to the Enable Pre Heating mode, the heater will always operate, so be careful about
power consumption.
- If you select [High] in the Enable Pre Heating mode, the chamber temperature increases.
Please be careful of using for a long time may affect the resin’s performance.
The First Exposure
This function is used to change the strength at which the Raft is attached to the platform.
The bond strength can be changed by adjusting the Exposure Time of the first raft.
Adjusting the Exposure Time in the [+] direction increases the bond strength, and adjusting in the [-] direction decrea-
ses the bond strength.
1
From the Home screen, press the
[Slide Menu Bar]
button.
2
On the Menu screen, press
[Settings]
.