Users Manual

3-7
Printing
3
4
Cancel Print
Press [Cancel]. A dialog box will then be prompted to confirm the termination of operation. Press [Yes]
to terminate the current operation and return the platform to its home position.
Caution
- If printing is canceled, more cured debris or contaminants may remain in the resin tank and
platform in comparison to when the printing is fully completed. Clean the platform and resin tank
thoroughly for the next printing.
Refer to “Resin Tank and Platform of 5. Maintenance” on how to clean them.
5
Printing Completion
If printing is complete, the platform moves up to return to the original position.
When the moving of the platform is finished, remove the platform from the machine, and then print.
Reference
- For removing a print from the platform and preparing for the next printing, refer to “4. Checking Printed
Output” for details.
Caution
- To prevent users from accidentally using the machine with the orange cover open, double safety
systems are installed.
When the cover is opened during printing, the machine is designed to temporarily stop printing for the
user’s safety. Once the cover is closed, printing will resume. However, as it may result in print quality
degradation or printing failure, do not open the orange cover during printing by mistake.