Before Using the Product Thank you very much for your buying the SINDOH’s Product. This Quick Start Guide specifies the right way to use the Machine and simple repairing in detail to maintain it in optimal state at all times and to contribute to your company’s office rationalization and efficiency. Please read the Quick Start Guide carefully and keep it close at head, before using this product. Before using the Machine, read the Guidelines for Safety Use to use the Machine sefely and correctly.
Table of contents Chapter 1. Introduction 1. Introduction---------------------- -------------------------------------------- 1-2 2.
4. Regulation notices- ---------------------------------------------------------- 1-11 USER INSTRUCTIONS FCC PART 15 - RADIO FREQUENCY DEVICES (for U.S.A.
Chapter 2. Overview of This Machine 1. User’s Guides ---------------------------------------------------------------- 2-2 Booklet manuals - - - - - - - - - - - - - - - - --------------------------------------------------- 2-2 User’s guides included in User Manual CD ------------------------------------- 2-2 2. User Manual CD ------------------------------------------------------------- 2-3 Operating environment - - - - - - - - - --------------------------------------------------- 2-3 3.
Changing Input Mode-- - - - - - - - - - --------------------------------------------------- 2-19 Key Operation-- - - - - - - - - - - - - - - - - - - --------------------------------------------------- 2-19 Chapter 3. Loading Paper 1.
Chapter 5. Basic Usage 1.
Chapter 6. Specifications 1. Checking the specifications of this machine ------------------------------- 6-2 2.
D200 Series Quick Start Guide Introduction 1
Introduction 1. Introduction This [Quick Start Guide] uses illustrations to describe operating procedures for the most commonly used functions in an easy-to-understand way. Start by using this manual to become proficient with the useful functions that this machine offers. For details on the various functions, refer to the User’s Guides on the User Manual CD included with this machine.
Introduction 1 2. Environmental Information Environmental initiatives The company continuously strives to reduce the negative environmental impacts of all stages of its business operations. As part of such activities, the company is implementing resource-saving steps by reducing the number of pages in the User's Guide. For the information necessary to operate the machine, please refer to the bundled User Manual CD.
Introduction 3. Safety information This section contains detailed instructions on the operation and maintenance of this machine. To achieve optimum utility of this device, all operators should carefully read and follow the instructions in this manual. Please read the following section before connecting the machine to the supply. It contains important information related to user safety and preventing equipment problems. Please keep this manual in a handy place near the machine.
Introduction 1 Disassemble and modification Symbol Description Do not modify this product, as a fire, electrical shock, or breakdown could result. If the product employs a laser, the laser beam source could cause blindness. WARNING Do not attempt to remove the covers and panels which have been fixed to the product. Some products have a highvoltage part or a laser beam source inside that could cause an electrical shock or blindness.
Introduction Power source Symbol Description Do not use the power source voltage other than being specified on the machine. Failure to do that could result in a fire or electrical shock. WARNING Do not use a multiple outlet adapter to connect any other appliances or machines. Use of a power outlet for more than the marked current value could result in a fire or electrical shock. Do not use an extension cord in principle. Use of an extension cord could cause a fire or electrical shock.
Introduction 1 Grounding Symbol WARNING Description Make sure to ground this product. (Connect the power cord to an electrical outlet that is equipped with a grounding terminal.) Failure to do so and an unlikely event of leakage could result in a fire or electrical shock. Installation Symbol WARNING Description Do not place a flower vase or other container that contains water, or metal clips or other small metallic objects on this product.
Introduction Ventilation Symbol CAUTION Description Using this product in a poorly ventilated room for a long time or producing a large volume of copies or prints may cause the odor of exhaust air from the machine. Ventilate the room well. Actions in response to troubles Symbol Description Do not keep using this product, if this product becomes inordinately hot or emits smoke, or unusual odor or noise.
Introduction Symbol 1 Description Do not leave toner-related parts (toner units, PC drum units, imaging units or developing units) within easy reach of children. Licking any of these parts or ingesting toner could damage your health. Do not store toner-related parts (toner units, PC drum units, imaging units or developing units) near devices susceptible to magnetism, such as precision equipment and data storage devices, otherwise they may malfunction. They could cause these products to malfunction.
Introduction When using the machine Symbol Description When using the machine, do not look at the light of the lamp for a prolonged time. Eyestrain could result. CAUTION Papers Symbol CAUTION Description Do not use stapled paper, conductive paper (such as silver paper or carbon paper) or treated heat-sensitive/inkjet paper, otherwise a fire may result.
Introduction 1 4. Regulation notices USER INSTRUCTIONS FCC PART 15 - RADIO FREQUENCY DEVICES (for U.S.A. users) Note - This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment.
Introduction Laser safety This is a digital machine which operates using a laser. There is no possibility of danger from the laser provided the machine is operated according to the instructions in the manuals. Since radiation emitted by the laser is completely confined within protective housing, the laser beam cannot escape from the machine during any phase of user operation. This machine is certified as a Class 1 laser product: This means the machine does not produce hazardous laser radiation.
Introduction Caution Use of controls, adjustments or performance of procedures other than those specified in this manual may result in hazardous radiation exposure. - This is a semiconductor laser. The maximum power of the laser diode is 20 mW and the wavelength is 770-800 nm. Laser safety label 6LQGRK &R /WG 6HRQJVXLUR LVLSVD JLO 6HRQJGRQJ JX 6HRXO .
Introduction 5. Caution notations and labels Safety precaution notations and labels appear on this machine at the following positions. Be very careful that an accident does not occur when operations such as removing paper jams and staple jams are performed. Reference - Do not remove caution labels or notations. If any caution label or caution notation is soiled, please clean to make legible.
Introduction 1 6. Special Notice to User For Canada Note - This product meets the applicable Industry Canada technical specifications. The Ringer Equivalence Number is an indication of the maximum number of devices allowed to be connected to a telephone interface. The termination on an interface may consist of any combination of devices subject only to the requirement that the sum of the RENs of all the devices does not exceed five.
Introduction If this equipment D202FKT causes harm to the telephone network, the telephone company will notify you in advance that temporary discontinuance of service may be required. But if advance notice isn’t practical, the telephone company will notify the customer as soon as possible. Also, you will be advised of your right to file a complaint with the FCC if you believe it is necessary.
Introduction For New Zealand 1 This device is equipped with pulse dialing while the Telecom standard is DTMF tone dialing. There is no guarantee that Telecom lines will always continue to support pulse dialing. 2 This equipment does not fully meet Telecom’s impedance requirements. Performance limitations may occur when used in conjunction with some parts of the network. Telecom will accept no responsibility should difficulties arise in such circumstances.
Introduction 7. Space requirements To ensure that machine operation, consumables replenishing, part replacement, and regular maintenance can easily be performed, adhere to the recommended space requirements detailed below. Note - Be sure to allow a clearance of 8 inches (200 mm) or more at the back of this machine for the ventilation duct.
Introduction 1 8. Operation precautions To ensure the optimum performance of this machine, observe the precautions described below. Power source The power source requirements are as follows. - Voltage fluctuation : Maximum ± 10% (at 110 V/120 V/220 to 240 V AC) - Frequency fluctuation : Maximum ± 3 Hz (at 50 Hz/60 Hz) - Use a power source with as little voltage or frequency fluctuations as possible. Operating environment The environmental requirements for correct operation of the machine are as follows.
Introduction 9. Legal restrictions on reproduction Certain types of originals must never be reproduced with the purpose or intent to pass reproductions of such originals off as the originals. The following is not a complete list, but is meant to be used as a guide to responsible reproduction.
D200 Series Quick Start Guide Overview of This Machine 2
Overview of This Machine 1. User’s Guides Booklet manuals Manual title Overview [Quick Start Guide] This guide describes how to perform basic operations of this machine and configure initial settings.
Overview of This Machine 2. User Manual CD User Manual CD is contained in the package of this machine. 2 The CD includes the user’s guides required to use this machine. Open the folder “User Manual” in User Manual CD. Double-click on PDF file you want to open. Operating environment Item Description Supported operating systems Microsoft Windows Vista (SP2) / Windows 7 (SP1)/ Windows 8 Apple Mac OS X 10.4/10.5/10.6/10.7/10.8 Required application For Windows - Adobe Reader 9.x/10.x/11.
Overview of This Machine 3. Notations and symbols used in this manual Procedural instruction ◎ This check mark symbol shows a precondition of a procedure. 1 This format number “1” represents the first step. 2 This format number represents the order of consecutive steps. - This symbol indicates a supplementary explanation of a procedural instruction. Symbols used in this manual Warning - This symbol indicates that a failure to heed the instructions may lead to death or serious injury.
Overview of This Machine Product and key names Notations used in this manual Description [ ] An item enclosed in brackets [ ] indicates a key name on the Touch Panel or computer screen, or the name of a user’s guide. 】, Bold text This presents a key name, part name, product name, or option name on the Control Panel.
Overview of This Machine 4. About this machine Name of each part Front side The illustration shows the main unit with optional Reverse Automatic Document Feeder D200RDF and Table D200TB(E) installed. No. No.
Overview of This Machine View with Reverse Automatic Document Feeder (RADF) opened 2 No. Name No.
Overview of This Machine View with Front Cover and Right Door opened No. 2-8 Name No.
Overview of This Machine Rear side The illustration shows the main unit with optional Reverse Automatic Document Feeder D200RDF, Table D200TB(E), Fax Kit D202FKT, and Fax Mount Kit D200FKTM installed. No.
Overview of This Machine Option configuration List of optional components No. Name Description 1 Original Cover D200PCV Used to fix the loaded originals. 2 Reverse Automatic Document Feeder D200RDF Automatically feeds and scans originals by page. This unit also reverses and automatically scans 2-sided originals. 3 Table D200TB(E) Used to install this machine on the floor. The following optional components are built into this machine and are not shown in the figure above. No.
Overview of This Machine 5. About power supply Power Switch and Power key locations This machine has two power switches: Power Switch outside the machine and Power key on the Control Panel. No. Name Description 1 Power key Press this key to switch this machine to Power Save mode. This function reduces power consumption and has more significant power saving effect. For details, refer to page 2-12.
Overview of This Machine Turning the Power Switch ON or OFF 1 Connect the Power Cord to this machine. 2 Connect the Power Cord to the power outlet. 3 When turning the main power on, press“ㅣ”of the Power Switch. A screen appears to show that this machine is in the process of start-up. When the main screen is displayed, this machine is ready to use. 4 When turning the main power off, press o of the Power Switch.
Overview of This Machine Using the Power key Press the Power key to switch this machine to Power Save mode. When the Power key is pressed, the status of this machine changes as shown below. Depending on how long the Power key is pressed, the state of the Power Save mode to be activated will differ. Power key Short press Hold down Status of this machine Status of LED Description Low Power mode (Default) Flash: Blue The back light of the Message Window is turned off to limit the power consumption.
Overview of This Machine 6. Names and functions of Control Panel keys No. 1 2-14 Name Description Message Window Displays setting screens and messages. 2 【Fax/Fax LED】 3 【Scan/Scan LED】 Press this key to enter Scan mode. (Scan to E-mail, Scan to FTP, Scan to a shared folder on a computer, or Scan to USB Memory) The LED lights up in blue to indicate that the machine is in Scan mode.
Overview of This Machine No. Name Description 5 【Keypad】 Use this keypad to enter desired number of copies. This keypad is also used to enter fax numbers, mail addresses, and names. For details, refer to page 2-19. 6 【Stop/Reset】 Press this key to return the settings to their defaults. This key is also used to press this key to stop functions. 7 【Start】 Press this key to start an operation such as copying, scanning, or faxing. - Lights up blue : This machine is ready to start operating.
Overview of This Machine No. 17 Name 【Redial/Pause】 Description Press this key to recall the last number dialed. This key is also used to insert a pause when a number is dialed. For details of the fax function, refer to [User’s Guide Fax Operations] included in the optional Fax Mount Kit D200FKTM. 18 【Addressbook】 19 Warning Indicator 20 2-16 【Utility】 Press this key to display the information registered in the favorite list, speed dial destinations and group dial destinations.
Overview of This Machine 7. About the Message Window display The machine status, error messages etc. can be checked in the Message Window. 2 Main Screen (Copy Mode) No. Name Description 1 Copy settings Allows the current settings to be checked and the various settings to be changed. For details, refer to [User’s Guide Copy Operations]. 2 Number of copies Indicates the number of copies. 3 Status Depending on the situation, the machine status or an error message may appear.
Overview of This Machine Main Screen (Fax Mode) Reference - For details, refer to [User’s Guide Fax Operations] included in the optional Fax Mount Kit D200FKTM.
Overview of This Machine 8. Entering characters Use the Keypad to enter numbers, characters and symbols. Changing Input Mode Every time the # key on the Control Panel is pressed, the input mode switches between the alphabet and numbers. Display Description [A...] Alphabet input mode [1...] Number input mode Key Operation The characters that can be entered differ depending on the input mode. The characters that can be entered for each input mode are as follows. Keypad [1...] Number input mode [A...
Overview of This Machine Reference - When the【#】key or the【 】key is pressed on the fax number input screen, # or appears respectively. - To erase all entered text, hold down the【Back】key. - To delete only part of the entered text, use the 【◀】key and【▶】key to move the cursor to the character that you want to delete, and then press the【Back】key. - If the same key is to be used to enter two characters in a row, press the【▶】key after selecting the first character.
D200 Series Quick Start Guide Loading Paper 3
Loading Paper 1.
Loading Paper - When printing on the reverse side of a sheet printed on one side, load paper into the Manual Feed Tray, and select [Side2] in the paper setting, improving a reduction of the printing image quality. [Side2] is available when plain paper, recycled paper, Thick 1, Thick 1+, Thick 2, Thick 3, or Thick 4 is selected in the Manual Feed Tray. - If Thick 3 or Thick 4 is selected for printing, resulting image quality may not be as expected.
Loading Paper Note - For all paper sizes, the areas excluding 3/16 inches (4.2 mm) from the paper edge for printing, 3/16 inches (4.2 mm) from the paper edge for copying and 1/8 inches (3 mm) from the paper edge for all other cases are judged to be printable areas. When configuring a user setting of the page size using the application, specify the paper size within the printable area so that the optimal result is obtained. - The page margin setting is determined depending on your application.
Loading Paper Storing paper To store paper, be sure to note the following points. - Store paper on an even, horizontal surface, and do not take the paper out of its packaging until it is loaded into a tray. If paper is left for a long period of time outside its package, it may cause a paper jam. - When not using paper that has been taken out of its package once, return it to the original package and store it in a horizontal, cool, dark place.
Loading Paper 2. Loading paper into the Manual Feed Tray How to load paper into the Manual Feed Tray When selecting a paper size other than for paper trays, use the Manual Feed Tray. To use the Manual Feed Tray, load paper and specify the paper type and paper size. 1 Open the Manual Feed Tray. 2 Spread out the paper guide. 3 With the side to be printed on facing down, insert the paper as far as possible into the feed slot. - For details on the available paper sizes, refer to page 3-2.
Loading Paper 3 Reference - Load paper within the guide indicating the upper limit. If paper is curled, flatten it before loading. 4 Align the paper guide to the paper size. 5 Lower the lever to raise the push up plate. The paper setting screen is displayed in the Message Window of this machine.
Loading Paper 6 Change the paper type and paper size on the Control Panel. When loading custom sized paper, also specify the paper size. Loading postcards Up to 20 postcards can be loaded into the tray at a time. 1 With the print side facing down, load a postcard as shown in the figure. 2 Align the paper guide to the paper size. 3 Lower the lever to raise the push up plate. The paper setting screen is displayed in the Message Window of this machine.
Loading Paper Loading envelopes Up to 10 envelopes can be loaded into the tray at a time. Reference - Before loading, remove air from the envelope(s), and securely press along the flap fold line. Otherwise, it will result in wrinkles or a paper jam. 1 3 Position so the flap part is facing up, and load an envelope as shown in the figure. - When the flap is in the long side of an envelope, load the envelope so that its flap is placed at the back. 2 Align the paper guide to the paper size.
Loading Paper 3. Loading Paper in Tray 1, Tray 2 The procedure for loading paper is common between Tray 1 and Tray 2. The following explains how to load paper into Tray 1. 1 Pull out Tray 1. 2 Slide the paper guide to fit the size of the loaded paper. 3 Load paper into the tray with the print side facing up. - For details on the available paper sizes, refer to page 3-2.
Loading Paper Reference - Do not load the sheets up to the point where the top of the stack is higher than the , mark. If paper is curled, flatten it before loading. 4 Align the paper guide to the paper size. 5 Close Tray 1. 3 5 Change the paper type on the Control Panel.
D200 Series Quick Start Guide Initial Settings of This Machine 4
Initial Settings of This Machine 1. Preparation for network connection (for administrators) Checking a LAN cable for connection Check that a LAN cable connected to the network is connected to the LAN port of this machine. For details on the cable connection port, refer to page 2-9. Assigning an IP address If this machine has a fixed IP address, manually enter the IP address, subnet mask, and default gateway address.
D200 Series Quick Start Guide Basic Usage 5
Basic Usage 1. Using the print function (Windows environment) This section describes how to configure print settings in Windows environment. Reference - For details on how to configure print settings in Mac OS environment, refer to Chapter 3 “Printing in the Mac OS Environment” in [User’s Guide Print Operations]. For details on how to configure print settings in Linux environment, refer to Chapter 5 “Printing in the Linux Environment” in [User’s Guide Applied Functions].
Basic Usage Checking the network settings Print out the Configuration Page, then check that an IP address is assigned to this machine. To print out the Configuration Page, select [REPORT/STATUS] - [REPORT] - [Configuration Page]. Reference - If no IP address is displayed, you need to set up the network. For details, refer to page 4-2. Installing the printer driver Install the printer driver using the installer. ◎ Administrator privileges are required to perform this task. ◎ Use the Driver CD.
Basic Usage - Among the connected printers, only the target model is automatically detected and displayed. If multiple target models are displayed, check the IP addresses. - If the connection to this machine cannot be recognized, it is not displayed in the list. In such a case, select [Specify the Printer/MFP Except for the Above. (IP Address, Host Name)], then manually specify the IP address and host name of this machine.
Basic Usage 9 If necessary, change the printer name or print a test page, then click [Finish]. Installation of the printer driver is then completed. Settings Description [Review] Displays the installed components for checking. [Rename Printer] Changes this machine name, if necessary. [Property] Sets the optional operating environment of this machine. For details, refer to page 5-9. [Print Setting] Changes the default print settings of this machine, if necessary. For details, refer to page 5-9.
Basic Usage 4 In the [Hardware] tab, click [Device Installation Settings]. 5 Select [No, let me choose what to do], select [Never install driver software from Windows Update.], then click [Save Changes]. - After you have installed the printer driver, change the setting back to [Yes, do this automatically (recommended)]. 6 Click [OK] to close the [System Properties] window. Installing the printer driver Install the printer driver using the installer.
Basic Usage ◎ Use the Driver & Utilities CD-ROM. 1 Connect a USB cable to the USB port of this machine. - For details on the cable connection port, refer to page 2-9. - If a wizard window for adding new hardware opens, click [Cancel]. 2 Insert the printer driver CD-ROM into the CD-ROM drive of the computer. - Make sure that the installer starts, then go to Step 3 . - If the installer does not start, open the printer driver folder on the CD-ROM, double-click [Set- up.exe], then go to Step 4 .
Basic Usage 8 Select the check box of the printer driver you want to install, then click [Next]. - For features of each printer driver, refer to page 5-2. 9 Check the components to be installed, then click [Install]. 10 If necessary, change the printer name or print a test page, then click [Finish]. Installation of the printer driver is then completed. Settings Description [Review] Displays the installed components for checking. [Rename Printer] Changes this machine name, if necessary.
Basic Usage Initial settings of the printer driver Configuring the optional environment of this machine When you use this machine for the first time, configure the printer driver so that it contains information such as what options are installed on this machine and whether or not authentication settings have been configured. 1 Display the [Properties] window of the printer driver. - In Windows 8.1, click [ ] in the Start window, then click [Control Panel].
Basic Usage 3 Click [OK]. How to print 1 Open data of the original using the application software. From the [File] menu, select [Print]. 2 In [Printer Name] (or [Select Printer]), make sure that the desired printer has been selected. - The [Print] dialog box varies depending on the application software. 3 Specify the print range and the number of copies to print.
Basic Usage 4 Click [Properties] (or [Preferences]) to change the print settings of the printer driver, if necessary. - The print settings you have changed here return to the default values when you exit the application software. 5 Click [Print]. Printing is executed. Reference - The printer driver contains a function to easily recall frequently used print settings. For details, refer to Chapter 2 “Printing in the Windows Environment” in [User’s Guide Print Operations].
Basic Usage 2. Using the scan function Available operations in scan function The original data scanned by this machine can be sent to a computer or server, or saved on the USB memory. It may be necessary to make the following settings prior to using the scan function. For details, refer to the explanations of each function. The scan function provides the following sub-functions. Function Description Scan to E-mail Sends a converted file to any E-mail address as an E-mail attachment.
Basic Usage How to send 1 Press the【Scan】key. 2 Load the original. 5 Reference - Do not place an original heavier than 4-7/16 lb (2 kg) on the original glass. Furthermore, do not use excessive force to press down on a book or any other form of original that must be spread on the original glass. Otherwise, the machine may be damaged or a failure may occur. 3 Select the current destination from the main (scan mode) screen by pressing the +/, key, then press the Select key.
Basic Usage 5 Specify the destination. - For details on how to specify a destination, refer to page 5-20. - You can specify multiple destinations. 6 If necessary, configure scan settings. 7 Press the【Start】key. - Press the +/, key before sending, and check the destination and settings as necessary. - To redo operations for specifying destinations or option settings, press【Stop/Reset】key. - If you press the【Stop/Reset】key while scanning the original, scanning stops. Sending starts.
Basic Usage 3. Using the copy function How to copy 1 Press the【Copy】key. 2 Load the original. 5 Reference - Do not place an original heavier than 4-7/16 lb (2 kg) on the original glass. Furthermore, do not use excessive force to press down on a book or any other form of original that must be spread on the original glass. Otherwise, the machine may be damaged or a failure may occur. 3 If necessary, configure copy settings. - The standard size will be detected automatically.
Basic Usage 5 Press the【Start】key. - If you press the【Stop/Reset】key while scanning the original, scanning stops. To stop scanning the original, check that [YES] is selected when an message appears to prompt you to stop scanning, then press the Select key. The original is scanned, and copying starts. Introduction of copy function This section describes the convenient copy functions. For details on how to use each function, refer to [User’s Guide Copy Operations].
Basic Usage Function Overview [Scan Resolution] Adjust the resolution of the original. [Bkgd. Removal] You can adjust the background density of an original with the colored background such as newspaper or an original made with recycled paper. [SHARPNESS] Adjust the sharpness of the contour of text or images. Smoothen the rough contour or sharpen the blurred image. [BRIGHTNESS] Adjust the brightness of an image. [Saturation] Adjust the saturation of an image.
Basic Usage 4. Printing a file stored on USB memory Supported USB memory devices USB memory devices that have the following specifications can be connected to this machine. Item Specifications Supported media USB memory device (USB 2.0/1.1 supported) File system FAT32 File Type PDF, Compact PDF, JPEG, TIFF, XPS, Compact XPS, OpenXPS, OOXML (.docx/.xlsx/.pptx), and PPML (.ppml/.vdx/.zip) Note Note the following points when connecting a USB memory device to this machine.
Basic Usage 3 To print a file other than PDF or XPS format, select [File Type] by pressing the 【▲/▼】key, then press the 【Select】key. Select [ALL] by pressing the【▲/▼】key, then press the【Select】key. - The setting selected in [File Type] is also applied to the next operation and after. When selecting a file to print, if you want to display only PDF and XPS format files, change the setting of [File Type] to [PDF, XPS]. 4 Select [File List] by pressing the【▲/▼】key, then press the【Select】key.
Basic Usage 5. Registering a destination Address book Registering a frequently used destination on this machine will save you the trouble of having to enter it each time you send data. A destination registered on this machine is called an Address Book. Up to 2,000 address books can be registered. The destination types that can be registered are E-mail address, computer name, etc. depending on the transmission mode. Registering an address book Address book can be registered or edited using Web Connection.
D200 Series Quick Start Guide Specifications 6
Specifications 1. Checking the specifications of this machine Item Description Name D200, D201, D202 Type Desktop type with integrated scanner and printer Color mode Full Color Scanning resolution Standard : 600 dpi×300 dpi Maximum : 600 dpi×600 dpi * * To use this function, contact your service representative. Writing resolution 600 dpi×600 dpi Gradation 256 Memory size 2 GB Originals Sheets, books, objects (Max. weight limit: 4-7/16 lb (2 kg)) Max.
Specifications Item Description Copy speed D202 : 28 sheets/min. (A4 or Letter, plain paper) D200/D201 : 22 sheets/min.
Specifications 2. Checking the specifications of optional devices Reverse Automatic Document Feeder D200RDF Item Specifications Model number D200RDF Document feeder type Reverse Automatic Document Feeder Original types 1-sided original : Plain paper (9-5/16 lb to 34-1/6 lb (35 g/m2 to 128 g/m2)) 2-sided/mixed original : Plain paper (13-5/16 lb to 34-1/16 lb (50 g/m2 to 128 g/m2)) Original size Max. A3 or Ledger (11×17) (Fax mode: Max.
Specifications ■ Memo 6 6-5
www.sindoh.com Warranty Conditions (D200, D201, D202) - The term of the warranty for the Machine of this product is 1 (one) year, and the quantity under warranty is 60,000 sheets. - Warranty expires, when machine’s real-time usage overruns quantity under warranty during the warranty period. ※ Average Use Quantity - The average use quantity is calculated based on the ordinary regular checkup.
※ Since the above replacement items are based on using the A4 5% chart in general use environment, the error of the replacement time may occur. ※ Please follow the replacement cycle since the above replacement items give direct impact. ※ The items (general parts) out of the above items should be checked up for the need or fault. If a trouble arises, the actions taken by professional engineer will be required.
