Instruction Manual

4-15
Settings and Changes of Each Function
4
Menu Description Value
Time Setting Set the system time. -
Time Zone Time for targeted country Time zones of each country
Beeper Alarm On/Off Setting No sound, Low sound, Normal sound, High
sound
Language Set the language on the panel. Korean*, English,Chinese,Spanish
Factory Default
Settings
Restore factory default Settings Are you sure to reset the settings?
Yes/No
Firmware Update Firmware update from Network Network Available ?
Yes/No
Check RollerMark Decide whether to remove rollermarks
during scan job on the flatbed.
Yes*, No
(*) is factory default settings.
Reset to Factory Default Settings
To reset the current settings to the factory default settings, select the factory setting menu from the general
setting menu, and follow the steps described below:
Follow the instruction below to reset to the factory default settings.
1
Press 【Menu】 button.
2
Press
【▲】 or 【▼】
button until [Settings] appears, and then press the【OK】 button.
3
Press
【▲】 or 【▼】
button until [General Settings] appears, and then press 【OK】 button