Instruction Manual

4-45
Settings and Changes of Each Function
4
Menu Menu Purpose Value
Wireless
Network
IP Address
Setting
DHCP Allocate IP Address automatically.
Static - IP Address: Enter IP Address.
- Netmask: Enter netmask
- Gateway: Enter Gateway
- Enter Primary DNS
- Enter secondary DNS
- Apply: Apply all settings
* Refer to P. 4-42
[Network Settings]
IP Address :
000.000.000.000 ~
255.255.255.255
Netmask :
000.000.000.000 ~
255.255.255.255
Gateway :
000.000.000.000 ~
255.255.255.255
Primary DNS :
000.000.000.000 ~
255.255.255.255
Secondary DNS :
000.000.000.000 ~
255.255.255.255
Show PIv6 Address Check the current printer IP
Address(IPv6)
0000:0000:0000:0000:
0000:0000:0000:0000 ~
FFFF:FFFF:FFFF:FFFF:
FFFF:FFFF:FFFF:FFFF
Show Mac Address Show Mac Address as a network
differentiator.
00: 00: 00: 00: 00: 00 ~
FF:FF:FF:FF:FF:FF
Remove the saved SSID Disconnect from the current wireless
AP device.
Setup Wifi-
Direct
Wifi On/Off Wifi-Direct switches on/off Setup encryption mode:
No Encryption
WEP
WPAPSK
WPA2PSK
WPAPSK/WPA2PSK
* For the meaning of each set-
ting refer to P. 4-50 [Entering
Wireless Security Password]
Setup Password: :
1)Enter current password
2)Enter new password
3)Check new password entered
* If a password is not setup, `2)
Enter new password` screen ap-
pears.
Show Wifi-
Direct
Check the current printer Wifi-Direct
IP
Setup SSID Setup the printer names to be
searched by mobile devices.
Setup En-
cryption
mode
Encryption mode can be selected
Setup a
password
Setup a password for Wifi-Direct
Show access
list
Show list of mobile devices accessed
to the printer