Instruction Manual

4-47
Settings and Changes of Each Function
4
Wired Network Setting
You have to set the IP address first for the network print and control. The DHCP server automatically can
allocate or fix the IP. The IP address can also be manually set.
Note
- Use the“ SINDOH Network Printer Setup” program to set the IP address in IPv6 mode.
Operating the Control Panel
1
Press 【Menu】 when the machine is ready.
2
Press 【▲】 or 【▼】 until 【settings】 appears, and then press 【OK】.
3
Continue to operate it until [Network Settings]
[ Wired Network] [Setup IP address] appears, and
then press 【OK】.
4
① IP Automatic Setting: Select 【DHCP】, and then press 【OK】.
② IP Manual Setting: Select 【Static】 and type in the IP address, netmask and gateway, and then press
【OK】.