Instruction Manual

Settings and Changes of Each Function
4-48
Note
- Use the“ SINDOH Network Printer Setup” program to set the IP address in IPv6 mode.
IP Manul Setting
IFollow the instruction below to enter the IP address.
① Press 【▲】 or 【▼】 to go to[Network Settings]
[Wired Network] [Setup IP Address], and then
select 【Static】Enter [IP Address].
② In the above screen, use the number pad or【◀】 or 【▶】 buttons.
③ Press 【OK】 to show the current values.
④ Enter the IP address of 12 digit in the same way when entering Netmask and Gateway.
⑤ Enter the settings for IP address/Netmask/Gateway and then press Apply button to apply IP manual
settings.