Instruction Manual

Settings and Changes of Each Function
4-52
② IP Manual Setting: Select 【Static】 and type in the IP address, netmask and gateway, and then press 【
OK】.
For manual setting refer to 「 IP Manual Setting」 p. 4-48
The default network setting of this machine is set to DHCP for automatic IP allocation.
In order to change your current network setting to fixed IP(manual IP setting) consult with your network
administrator to use an allocated IP. Any setting of IP identical to that of other devices will make your network
disabled.
Wi-Direct Setting
Wi-Fi Direct is a technology for easy connection, print and management between printers and mobile devices.
Wired network and wireless network can be used with Wifi Direct at the same time.
Operating the Control Panel
1
Press 【Menu】 when the machine is ready to print.
2
Press 【▲】 or 【▼】 until 【 settings】 appears, and then press 【OK】.
3
Continue to operate it until
[
Network Settings
]
->
[
Wireless Network
]
->
[
Wifi-Direct Setting
]
【On/Off】 ap-
pears.