User's Manual

Chapter 2. Installing and Set Up
2-8
Loading
direction of
the
card
Setting Card
1. Push the card set unit open button, and
draw out the card set unit.
2. Place the dust box to the card set unit.
3. Remove only the underside of the card
packing film.
4. While pulling the card guide (blue lever),
turn the printing surface on the front
side and place it in the printer. And
remove the upper side of the packing
film.
Empty the dust box if there is any trim in it.
Please arrange
the card height
in order flatly.
Place the card in
the printer. And
remove the upper
side of packing
film
.
Convex
portion is
the lower
left.
Put the card in
the far side of
the blue lever.