User's Manual

Chapter 4. Error Handling
4-1
Printer Status lamps are displayed in red
When the error happens, the details of the error can be confirmed with the printer status lamps.
Printer Status Lamps and Card Setting Lamp display ●:on、○:off、＊:flashing
／ : Indicates that irrespective lit
LED Display
Status Corrective Action
POWER MEDIA ERROR
● ○ ＊
The card set unit or the
upper unit are opened.
Close the card set unit and
the upper unit.
● ○ ●
Card jam occurred.
Remove the car
d. If card
jam occurs frequently,
consult with the service
center.。
Trouble of printer control
board.
The printer mechanical
section is faulty.
If it occurs frequently,
consult with the service
center.
● ＊ ●
The ink ribbon set is not
supported.
Ink ri
bbon or printer
abnormality is assumed.
Consult with the Service
Department.
● ● ●
Trim box is full. Empty the trim box.
The card is not set.
Card empty. Set the card.
The ink ribbon is not
loaded.
Ribbon empty.
Set the ink ribbon.
Replace the ink ribbon.
● ＊ ○
The ink ribbon is during
the initial setting.
Wait the initial setting of
the ink ribbon is complete.