User's Manual

Chapter 4. Error Handling
4-5
2）If the card move to the position as shown in
the following figure, pick up the end of the
card and pull it up (as tilt it slightly
backward）, and remove it.
(When there is the card at the paper outlet side.)
1）Turn the knob (green) on the left side of the
printer, and move the card to the front side.
2）If the card comes out from the paper
outlet, pull it up forward, and remove it.
(When the card do not be seen.)
1）Turn the knob (green) on the left side of
the printer to the direction of the
directing arrow shown in the following
figure. The card comes out shown in the
following figure after turning the knob for
the while (about 5 rotations), and pull it
to upward and remove.
Knob
Card