User's Manual

Chapter 4. Error Handling
4-7
Power Supply Interrupted during Printing
In case, power supply interrupted during the
printing, Thermal Head will be kept pushing to
Platen. Leaving this situation for a long time,
shape of Platen can be warped. In order to avoid
this situation, please follow the instruction
below.
1. Turn off the power of the printer.
2. Turn on the power for 3 or more seconds after
turning off the power.
3. Card Jam is displayed on the printer status
lamps, open the front cover and take the
necessary action according to the instruction
provided in 4-2, "Card Jam".
When the Ribbon is snapped
1. Remove the ink ribbon.
2. Stick the broken part of the ribbon with a
tape.
3. Turn the ribbon on the winding side and
rewind the taped section completely.