User Manual

II. Screen display
III. Product parameter
◆ Key number: 2
◆ Key life: Million times
◆ Number of display: 10 scrolling numbers
◆ Screen: OLED monochrome screen
◆ Display type: a group of three-digit or five-digit number (with storage function)
◆ Battery: 3.7V lithium battery
◆ Battery capacity: 150mAh
◆ Prompt time: 1 to 15 seconds
◆ Receiving sensibility: -114dbm
◆ Frequency: 433.92MHz
◆ Pager capacity: 500
◆ Prompt mode: Vibration only
◆ Standby time: 5 days
◆ Number deleting mode: manually, automatically
◆ Calling number display: all positions can be set with English letter or digit(0-9, A-Z)
IV. Operation instruction
※ a. Please charge the receiver before the first using.
b. Then pressing the key ENT 5 seconds to enter into standby mode after full charging
(clock display time). Please turn off the receiver before charging. When the charging
indicator light becomes green color, you can use it.
c. Standby mode, OLED screen display will turn off automatically after 5 seconds. OLED
screen display will light by pressing keys or the pagers calling.
d. When function F01, F04, F05, F07, F11 cannot be set, please refer to 10 “Password
setting” to confirm whether the watch is encrypted (default set is not encrypted). After
decryption, all functions can be set.
1. Power on/off
1) Power on: Power off mode, press and hold key [ENT] for 5 seconds, power is on.
2) Power off: Power on mode, press and hold key [ENT] for 5 seconds, power is off.
The clock time does not to be zero.
2. Number register
1) Standby mode, press and hold key [FUN] until „F01‟ shows on the screen.
ENT
FUN
12：00
00/00
Battery indicator
Alarm clock indicator
Time display
Date display