User Manual

5. Display time setting
1) Standby mode, press and hold key [FUN] 3 seconds till „F01‟ appears.
2) Press key [ENT] repeatedly to choose „F03‟.
3) Press and hold [FUN], till a number between 00 and 99 appears. Press [ENT] to change
the flashing number, press [FUN] to change the cursor position. The number 01-99
means the time is 1-99 seconds, 00 means unlimited display (It can be delete manually).
4) Press and hold [FUN] till „F03‟ appears.
5) Press and hold [ENT] till back to standby mode. The display time setting is done.
6. Deleting registered numbers
1) Standby mode, press and hold [FUN] 3 seconds till „F01‟ appears.
2) Press [ENT] repeatedly to choose „F04‟.
3) Press and hold [FUN] till the smallest registered number appears on the screen.
4) Press [FUN] repeatedly to choose the number to be deleted, then press and hold [ENT]
to delete it. And the next registered number will appear on the screen after the deleting.
5) Press and hold [FUN] till „F04‟ appears.
6) Press and hold [ENT] till back to standby mode. Deleting is done.
7. Initialization
1) Standby mode, press and hold [FUN] till „F01‟ appears.
2) Press [ENT] repeatedly to choose „F05‟.
3) Press and hold [FUN] till 000 appears, and press key [ENT] 3 seconds to start the
initialization. The LED screen shows “---“. When „000‟ appears again, the initialization
is done.
4) Press and hold [FUN] till „F05‟ appears.
5) Press and hold [ENT] till back to standby mode (time mode).The initialization is
done.
8. Time setting
1) Standby mode, press and hold [FUN] 3 seconds till „F01‟ appears.
2) Press [ENT] repeatedly to choose „F06‟.
3) Press and hold [FUN] into the time mode, for example „08︰10 16/05/25‟ (hour, minute,
year, month, day) appears.
4) Press [ENT] to set clock time and year, month, day and press [FUN] to choose hour,
minute, year, month, day.
5) After time setting, press and hold [FUN] till „F06‟ appears.
6) Press and hold [ENT] till back to standby mode. Time setting is done.
※ Time will return to zero if the battery runs out. It needs to reset after charging.
9. Number display mode setting
1) Standby mode, press and hold [FUN] till „F01‟ appears.
2) Press [ENT] repeatedly to choose „F07‟.
3) Press and hold [FUN] till „00‟ or „01‟ appears