User Manual

5) Press key (ENT), and [F4] appears.
6）Press key (ESC) and back to standby mode. The setting is done.
 Number display mode setting(not suitable for receiver SC-R10)
1) Standby mode, press key (FUN) 3 seconds till [F1] appears on the screen.
2) Use key (UP) to choose [F5].
3) Press key（ENT）and [01] appears.
4) Use key (UP), (MOVE) or (DOWN) to choose a number. 01～10 is all-digital
display(default setting),and 11～20 is digits beginning with an English letter(the
letters are ABCDEFHPJL).
5) Press key (ENT), and [F5] appears.
6）Press key (ESC), back to standby mode. Done.
 Deleting registered number or initializing the receiver
1) Standby mode, press key (FUN) 3 seconds till [F1] appears on the screen.
2) Use key (UP) to choose [F6].
3) Press key (ENT), the registered minimum number appears.
4) Use key (UP)、（ MOVE）， or (DOWN) to choose the number to be deleted.
5) Press key (ENT), with the prompt music, the selected number flashed and deleted.
The next registered number appears on the screen.
Keep pressing key (ENT), “---“appears on the screen, then [00]、[000]appears, the
initializing is completed.
6) Press key (ESC) and [F6] appears again.
7) Press key (ESC) once more, back to standby mode, the number deleting is
completed.