User Manual

13.Data download( used to copy registered numbers by serial port between two

receivers)

1) Standby mode, keep pressing key [FUN] till [F01] appears.

2) Press key [UP]/[DOWN] repeatedly till [F13] appears.

3) Keep pressing key [FUN] till [tr] appears.

4) Keep pressing [ENT] for 3 seconds, the screen shows [tr-on]with flash, data download begins.

5) Keep pressing [FUN] for 3 seconds, the screen shows [F13]

6) Keep pressing [ENT] back to standby mode, data download finished.

14.Computer data download function( use together with data download

software)

3 digit display

4 digit display

【000】 display mode

【000.0】display mode

【000】 display mode

【000.0】display mode

APE2900 receiver mode

APE2100 receiver mode

APE2800 receiver mode

set number to be

For example: number

xxx-01 on computer

xxx-xx on computer

0002.1 need to be set

10002 on computer

Remarks: not support the function parameter set

15.Volume adjustment

1) Standby mode, press key [UP]/[DOWN] to choose the volume wanted, 00-07 means 8

volume degrees, the bigger the number, the louder the volume, 00 means mute.

2) Keep pressing [FUN]for 3 seconds to standby mode, volume adjustment finished.