Instruction Manual

1 3 APPLICATIONAL notes
13-1 How to set the presser foot for sewing
knitted materials
(used only for double chain stitching)
This presser foot is very convenient for sewing
cloth parts with many curves.
(1) First, raise the presser bar lifter, then remove
the presser set screw (Figure 51).
(2) After changing the presser foot firmly tight
en the set screw after confirming that the
needle holes are in the proper position.
Presser foot for sewing knitted material.
Figure 50
13-2 Double-hinged presser foot
Double-hinged presser foot, part number SUJ-
8101-00A, illustrated in Figure 50(A), is rec
ommended for overedging and safety stitching
when sewing over cross seams and for better
formation of the stitching at the start and finish
of the seams of heavier cloth materials.
This presser foot is optional and must be ordered
separately.
Figure 51
1 7