User Manual

14
WINDING THE BOBBIN (Cont’d)
When bobbin is full
I Stop machine.
I When bobbin is full the bobbin winder
will lift away automatically.
I Remove bobbin and tighten stop motion
screw.
TO CONTROL AMOUNT OF
THREAD ON BOBBIN
i Loosen screw which holds
stop latch to bobbin winder
frame (A).
1 Press bobbin winder frame on
handwheel for more thread
on bobbin
1 Lift bobbin winder frame for
less thread on bobbin.
1 Tighten stop latch screw.
If thread doesn’t wind evenly
Loosen screw which holds
bobbin winder tension
bracket to machine bed.
Move bracket to left if
bobbin winds high on
right; move to right if
bobbin winds high on left.
Tighten tension bracket
screw.