User manual

Free Motion Darning, Stippling

* The is an optional accessory not

included with your machine. (1)

Install the darning plate. (2)

For darning, first sew around the edge of the hole (to secure

the threads). (5)

Free motion darning is accomplished without the sewing

machine internal feed system. Movement of the fabric is

controlled by the operator. It is necessary to coordinate

sewing speed and movement of fabric.

Using the optional

will help guide you as you sew, in a

meandering fashion to create small curving lines to hold

layers of fabric and batting together.

darning/ embroidery foot

darning/

embroidery foot

Darning:

Remove the presser foot shank. (3)

Attach the to the presser foot bar.

The lever (a) should be behind the needle clamp screw (b).

Press the on firmly from behind with

your index finger and tighten the screw (c). (4)

First row: Always work from left to right. Turn work by 90° and

sew over previous stitching. A darning hoop is recommended

for easier sewing and better results.

Note:

Stippling:

Set the machine for straight stitch.

1 2

Model 1408 Model 1409