User Manual

Additional Presser Feet page 1

BLIND HEM FOOT

The Blind Hem Foot is used for hemming skirts, pants and other sewing projects

in one easy operation. It is recommended for use on stretch or textured fabrics.

Machine Preparation

• Differential Feed: Set to “N”

• Needles: Use the right needle only

• Upper Knife: Engaged

• Stitch Length: Set to 3 or 4

• Foot: Attach (snap-on) Blind Hem Foot

Sewing Instructions

• Fold fabric as illustrated, and insert it under the presser foot

• Line up the edge of the fold with the guide plate (2)

• Adjust the positioning of the fold of the fabric with the adjustment screw (1)

• The fold of the fabric must always be in line with the left needle

• Begin to sew, keeping the fold of the fabric along guide plate (2)