User Manual

Additional Presser Feet page 4
TAPING FOOT
The Taping Foot is used for inserting a tape into seams that will stretch easily.
Inserting the tape will stabilize the seam.
Machine Preparation
• Differential Feed: Set to “N”
• Needles: Use both the right and left needle
• Upper Knife: Engaged
• Stitch Length: Set to “N”
• Foot: Attach (snap-on) Taping Foot
Sewing Instructions
• Set the needles at the highest position
• Raise the presser foot
• Insert the tape into the guide (1), and pull it through to the back of the foot
• You may adjust the position of the tape in relationship to the needles by turning the adjust-
ing screw (3)
• Lay the seam under the presser foot, lining up the fabric to sew a 5/8” seam
• Lower the presser foot and begin to sew
3