Instruction Manual

5. Continue to thread points 4-8. Slip the thread into the forward slot of the
thread guide . Go over the take up lever . Continue by slipping the
thread into the left slot of the thread guides  and .
6. Before threading the eye of the needle, make sure the thread is in front of
the thread guide located on the bottom of the needle clamp.
7. Thread the eye of the Left Cover Stitch Needle .
8. Draw about 4 inches of the thread through the needle eye towards the back
of the machine.
9. Place the thread to the back, under the Presser Foot. Lower foot and sew.
Triple Cover Hem page 13