User Manual

Bar tack

Multi-stitch zig-zag

For sewing on lace and elastic, darning, mending, and

reinforcing edges.

Set the stitch pattern dial to " ".

For mending:

Place patch in position. The stitch length can be shortened to

produce very close stitches. (1)

When mending tears, it is advisable to use a piece of

backing fabric to reinforce. The stitch density can be varied

by adjusting the stitch length. First sew over the center and

then overlap on both sides. Depending on the type of fabric

and damage, sew between 3 and 5 rows. (2)

This function is used to secure the tops of kick pleats, as well

as pocket openings.

Set the stitch pattern dial to " " or " ".

Set the stitch length dial to "1" - "1.5".

First use a straight stitch across the top of the pocket or pleat.

This seam should be approximately 1/4 to 1/2 of an inch long.

Set stitch to zig-zag and stitch over the straight stitch.

Backstitch at the beginning and end of stitch to secure ends.