User Manual

Free motion darning, stippling

* The darning foot is an optional accessory not included with

your machine. (1)

Install the darning plate. (2)

For darning, first sew around the edge of the hole (to secure

the threads). (5)

Free motion darning is accomplished without the sewing

machine internal feed system. Movement of the fabric is

controlled by the operator. It is necessary to coordinate

sewing speed and movement of fabric.

Stippling:

Sew a straight stitch. Using the optional darning foot will help

guide you as you sew, in a meandering fashion to create

small curving lines to hold layers of fabric and batting

together.

Set the machine as illustrated.

Darning:

Remove the presser foot shank. (3)

Attach the darning foot to the presser foot holder. The lever

(a) should be behind the needle clamp screw (b). Press the

darning foot on firmly from behind with your index finger and

tighten the screw (c). (4)

First row: Always work from left to right. Turn work by 90°

and sew over previous stitching. A darning hoop is

recommended for easier sewing and better results.

Note:

1 2