User Manual

Applique and blindstitch applique

Position applique piece on background fabric. Use the zig-

zag stitch or the blindhem stitch.

Align needle so that it pierces background fabric along the

outside edge of the applique. Lower presser foot. Set stitch

length between "1.5" and "3".

Begin sewing following the edge of your applique. To pivot

for curves or corners, leave needle down in fabric on outside

edge of applique, lift foot and pivot.

Tip:

If using the optional blindhem foot, align the lip of the

blindhem foot guide so that it sits directly under the edge of

the applique.

You may need to adjust the position of the guide to bring it

closer or further from the edge of the applique, by using the

thumbscrew located at the right of the foot.