Operation Manual

ManualsBrandsSinger ManualsHousehold228 Memo Matic

*Holding stitches*

!

* When

knitting

separately

as

for

the neckline,

etc. the holding stitch method should

be

applied

for

the stitches

not

to

be

knitted

for

a time.

(In case

of

holding stitches with needles

in

D posi-

tion.)

*

Push

up

to

D position the required number

of

needles

not

to

be

knitted

. Set the Russel Levers

to

I position.

(In case

of

holding stitches with waste knitting.)

* Set the Cam Lever at

STOCKINET,

Russel

Levers at I

position

.

(

1)

For the stitches

that

are

to

remain on the

Knitter,

push up the needles

to

D position,

leaving the needles

for

those

to

be

removed in

B position.

(2) Thread the Yarn Feeder

with

a waste yarn

of

different

colour

and

knit

several rows

of

waste

knitting.

Then remove the waste

knitting

.

(3) When re-knitting the stitches held

with

waste

knitting,

pick up the stitches on the last

row

of

the main

knitting

and place them on the

Knitter

and

continue

knitting.

-25-

Holding stitches with

the

Ravel Cord.

*

Push

the required number

of

needles

to

D position and lay the Ravel Cord across

the hooks. Starting

from

the end needle,

manually

knit

the needles one by one

to

A

position

.

In order

to

knit

again,

with

both

hands

pu

II

both ends

of

the Ravel Cord bring-

ing the needles

to

B

position

and remove

the Ravel Cord.