Operation Manual

*Set
the
Knitter
on
a
table.
*
Auto-Tension
Yarn
Rod
- 1 -
(1) Place the
Knitter
on a table
with
the handle on
your
op-
posite side and unfasten
the
latches.
(2)
Lift
the upper
case
slightly and
pu
II
the cover towards
you
to
free
it
from
the
Knitter
. (The
Arm,
Yarn Rod and Auto-Ten-
sion are housed in the
Top
Cover.)
(3) Remove
the
protective pack-
ings.
~Clamps
(4) Insert the Clamps
into
the
slots
at the
bottom
of
the casement.
Fasten the Clamps
by
tighten-
ing screws.