Instructions / Assembly

GB
40
Straight stitching
Zigzag stitching
Turn the stitch selection dial so that the pointer is set to the
straight stitch position. "A"
Generally speaking, the thicker the fabric, thread and needle,
the longer the stitch should be.
Choose your needle position, from center position to left needle
position by changing the stitch width dial from "0" to "5".
Turn the pattern selector dial to " ".
The maximum zigzag stitch width for zigzag stitching is "5";
however, the width can be reduced on any pattern. The width
increases as you move zigzag dial from "0" - "5". For twin
needle sewing, never set the width wider than "2.5".
The density of zigzag stitches increase as the setting of stitch
length dial approaches "0".
Neat zigzag stitches are usually achieved at "2.5" or below.
Closed up zigzag stitches (close together) are referred to as a
satin stitch.
Function of stitch width dial (1)
Function of stitch length dial while zigzag (2)
12