Use and Care Manual

- Place thread and spool holder onto spool pin (1). For smaller

spools of thread place spool holder with small side next to

spool. (2)

- Snap thread into thread guide. (3)

- Wind thread clockwise around bobbin winder tension discs. (4)

- Thread bobbin as illustrated and place on spindle. (5)

- Push bobbin to right. (6)

- Hold thread end (7). Step on foot control pedal. (8)

- Cut thread (9). Press bobbin to left (10) and remove.

When the bobbin winder spindle is in "bobbin winding" position,

the machine will not sew and the hand wheel will not turn. To

start sewing, push the bobbin winder spindle to the left (sewing

position).

Please Note:

Winding the bobbin