Manual

50
BUTTON SEWING FOOT
Set Red Lever at 4. The needle should then
enter into the right hole of the button. Take
approximately six zigzag stitches in this position.
End on the left side.
To fasten stitching, adjust to number one
Red Lever setting and take approximately three
stitches.
THREAD SHANK
In order to form a shank, stitching is done
over a regular machine needle. Position button
and lower button foot. Place needle in the groove
of the foot so the point enters the hole.
A larger shank results when the heavy end of
the needle is utilized.