Owner's manual

SINGER

Zigzag stitching

Before moving selector, make sure needle is fully raised.

Needle position selector

Most of your zigzag stitching will be done with the

needle in the centre ( J, ) position.

Left( L ) and right ( J ) settings are used for special

stitch placement.

Stitch v/idth selector

To produce any of the zigzag stitches, the stitch width

selector is moved from its straight position ( j ) to any

of its other positions. The further you move the selector

lever toward the right, the wider your stitch will be.

Adjusting Stitch length

Any stitch length setting from 1 to 5 will give you a more

or less open zigzag stitch.

The higher the number, the more open, or further apart

your stitches will be.

The area between 0 and 1 on the dial is used for satin

stitching, a series of closely spaced plain zigzag stitches

that form a smooth satin-like surface.

J V