Owner's manual

SINGER
Changing the light bulb
Caution: Before changing light bulb, make sure you have
removed plug from socket outlet and remove
face plate which covers the light bulb. Be sure
to replace the face plate which covers the light
bulb before operating the machine.
This machine is designed to use a 15 watt maximum light
bulb with a bayonet fitting.
Removing bulb
• Loosen and remove screw (1) located on face plate.
• Remove face plate by grasping it around the bottom
edge and pulling toward the left, then down and away
from machine.
• Do not attempt to unscrew light bulb.
• Push bulb up into socket and turn in the direction of
arrows to unlock bulb pin.
• Pull bulb down and out of socket.
Replacing bulb
• Push new bulb up into socket and turn in the direction
of arrows until pins lock into position.
• Replace face plate again and tighten screw.