User Manual

applications
APPyQüÉ
Appliqué adds beauty and interest to clothing and household linens. You can create your own
design, trace a simple outline from a colouring book, or use a motif cut from a printed fabric.
Fabrics of similar or different textures combine equally well
A closely spaced plain zig-zag stitch is used for appliqué work. Although you may vary stitch
width to accommodate fabric weave and texture, never allow the stitch to be too wide.
Make a test sample to help you decide which of the following methods is best for your fabric
and design.
lllllll
iilethod 2
♦ Needle Position: L iXi ^
♦ Stitch Width: To suit fabric
♦ Stitch Length: Between D and 1
♦ General Purpose Needle Plate
♦ Special Purpose Foot
Preparation
♦ Baste appliqué design to fabric and outline
the design with a short straight stitch,
♦ Remove basting and press.
Method 1 - Trimming after Stitching
♦ Set machine as code recommends,
♦ Outline the entire design with appliqué
stitching.
♦ Cut away the fabric or the outer edges of
the stitching with embroidery scissors.
Method 2 - Stitching after Trimming
♦ Trim outside fabric edges close to straight
stitch outline of design.
♦ Set machine as code recommends.
♦ Overedge the design with appliqué stitching.
This step will produce a smooth, lustrous
finish that
requires no additional trimming.
24