User Manual

CLEAMrNG YOUR MACHINE
CAUTION: Before cleaning your machine, dis~
WBhmecTliTliXMMli . .
With a soft doth or Sint brush, dean all points
indicated by arrows, especially the bobbin
case area and feed. Also, clean exposed parts,
if necessary a mild solution of soap and water
may be used to remove stubborn stains. No
other cleaning liquid or powder should be
used.
Periodically apply a drop of oil only to the
areas indicated after cleaning.
REMOVING BOBBIN CASE
REPLACING BOBBIN CASE
Raise needle, open slide píate, remove
needle plate and lift out bobbin.
Turn bobbin case holder A to back as far
as it will go.
Lift out bobbin case B.
36
Insert bobbin case with a back and forth;
motion, so that front of the case is under:
the position plate C. Turn holder afi the
way forward to lock bobbin case.