Use and Care Manual

SPOOL PINS

HORIZONTAL SPOOL PIN

Place thread spool on the pin and secure with a spool cap to

ensure smooth ow of thread. If the thread spool has a thread

retaining slit, it should be placed to the right.

Select the correct spool pin cap according to the type and

diameter of spool being used. The diameter of the spool pin

cap should always be larger than that of the spool itself.

PRESSER FOOT LIFTER

There are three positions for your presser foot.

1. Lower the presser foot to sew.

2. Raise the lifter to the middle position to insert or remove

fabric, and to change presser foot.

3. Lift it to its highest position to accommodate thicker fabrics.

VERTICAL SPOOL PIN

Attach the spool pin and place a felt disc over it. Place a spool

of thread on the spool pin.

Spool pin cap

Couvre-l

Tapa del pasador carrete

Spool

Bobine

Carrete

Spool pin

Porte-bobine

Pasador carrete

Vertical spool pin

Porte-bobine vertical

Pasador de carrete vertical

Spool

Bobine

Carrete

Thread retaining slot

Fente de retenue de l

Ranura de retención de hilo

Spool pin felt discs

Rondelle feutre

Disco del pasador carrete

DARNING PLATE

Use the darning plate when you need to control fabric feeding

for button sewing, free motion work and free motion darning.

Raise needle and presser foot, and position darning plate onto

the needle plate with the two pins on the back inserted to the

holes of needle plate.