Use and Care Manual

STRAIGHT STITCH FOOT

Use this foot when close control is needed according to the

type of fabric or stitching procedure.

OVERCASTING FOOT

This foot is used to guide fabric when overcasting. Place your

fabric under the foot with its edge against the edge guide and

start to sew.

DARNING & EMBROIDERY FOOT

This special foot may be used to create free motion

embroidery, free motion monograms, as well as free motion

quilting, also known as stippling.

Machine Preparation

• For free motion embroidery and monograms: Set machine

for Zigzag Stitch in the width you desire. The stitch length will

be controlled by the movement of your hands.

• For free motion quilting (stippling): Set machine to Straight

Stitch. The stitch length will be controlled by the movement

of your hands.

• Cover feed dogs with darning plate.

• Attach Darning & Embroidery Foot, making sure the

extension arm sits over the needle clamp screw.

Sewing Instructions

1. Stencil or draw your pattern onto the right side of your

fabric.

2. Insert fabric under presser foot.

3. Lower presser foot and begin moving your fabric following

your design lines.

5. SPECIAL ACCESSORIES

NOTE: For better control when free motion sewing, it

is recommended that you hoop the section of fabric

that you are working with. Hand movement will control

the quality and look of your stitch. Do not forget to

lower your presser foot.

Extension arm

Bras de rallonge

Brazo extensor

Edge guide

Guide de bordure

Guía de orillas