User Manual

8
Bartack Buttonholes
Machine Set
Machine SetMachine Set
Machine Set-
--
-Up:
Up:Up:
Up:
Stitch: Step One of the Four-Step Buttonhole
Stitch Width: 5-7
Stitch Length: Buttonhole symbol
Presser Foot: Buttonhole Foot (after attaching, push the moveable
white part to most rear position)
Materials:
Materials:Materials:
Materials:
Home décor fabric with interfacing or tear-away stabilizer
Disappearing marking pen or tailor chalk (for marking size of buttonhole)
Button (to establish length of buttonhole)
Procedure:
Procedure:Procedure:
Procedure:
Fold fabric in half crosswise, with interfacing or stabilizer between layers.
Lay button on fabric and mark the top and bottom of the button.
This will establish the starting and ending points of the buttonhole.
Push the foot’s white movable piece to the most forward red line on
the foot.
Place the fabric under the foot, matching the foot’s red mark with the
bottom mark on the fabric.
Sew 5 to 6 stitches of Step One (which is the lower/bottom bartack)
Cut open buttonhole and use a seam sealant to reinforce the buttonhole.
Note: To adjust the density or if the sides are uneven, refer to the manual
for adjustment instructions.