Use and Care Manual

INSERTING ZIPPERS AND PIPING

Use zipper foot to sew to the right or left of the zipper or close

to the cord.

INSERTING ZIPPERS

To sew down the right side, attach left side of zipper foot to

presser foot holder so that the needle passes through the

opening on the left side of the foot.

To sew down the left side, attach right side of foot to foot

holder.

HAND-LOOK QUILT STITCH

This stitch is designed to look like hand sewing for topstitching

and quilting.

1. Thread bobbin with desired top stitching color. When

sewing the machine will pull this thread to the top.

2. Thread machine with invisible or lightweight thread the color

that matches your fabric. This thread should not show.

3. Increase thread tension a little bit at a time until you

acheive the desired appearance.

4. Start to sew.

PIPING

Create a piping by covering a ller cord with a bias strip of

fabric. Attach the right side of the zipper foot to the foot holder

so that the needle passes through the right side of the zipper

foot.

Baste the seam allowances together, enclosing the ller cord,

forming seam tape for the piping.

Helpful Hint: Slight adjusting of the needle position to

sew closer to the piping may be accomplished with

the Stitch Width Control.

Needle to left of foot

Aiguille à gauche du pied presseur

Aguja a la izquierda del

prensatelas

Needle to right of foot

Aiguille à droite du pied presseur

Aguja a la derecha del

prensatelas

STRAIGHT STITCH WITH AUTO

TIE-OFF FUNCTION

1. Press the foot control and the machine will sew 4 stitches

forward and then 4 stitches in reverse and continue to sew

forward until the foot control is released.

2. Push the reverse button and the machine will sew 4

stitches in reverse and then 4 stitches in forward and stop.

NOTE: For a dramatic appearance, experiment with

different tension and stitch length combinations.