Instruction Manual

42
BAR TACK STITCH
1.0~3.0
0.3~1.0
D
1 Select pattern 22 of Group
"A" to get the bar tack stitch. Change the
presser foot to the buttonhole foot.
from the Patterns
2 Pull the button holder to the rear. Set the
button guide plate on the buttonhole foot to
the desired length.
2
1
A-22
4 Pass the upper thread down through the
hole in the presser foot. Pull down the
buttonhole lever. The buttonhole lever is
positioned behind the bracket on the
buttonhole foot. Gently hold the end of the
upper thread in your left hand, and then
start sewing.
4
5 Bar tack stitches are sewn.
6 As an example, the illustration shows the
procedure for sewing bar tacks at pocket
corners.
5
6
3 Position the fabric so that the needle is 2mm
(1/16") in front of where you want the
sewing to start, and then lower the presser
foot.
3
5 6
21
Starting point
2mm
3
4