Use and Care Manual

12.The Pressing Cushion is a fabric covered pad used for pressing gathered or contoured areas such
as sleeves, darts, yokes
12.The Pressing Cushion is a fabric covered pad used for pressing gathered or contoured areas such
as sleeves, darts, yokes
13. The Measuring Cup is designed to assist you in easily and consistently filling the Water Reservoir
with the optimum amount of water. filling the Water Reservoir with the optimum amount of water.
13. The Measuring Cup is designed to assist you in easily and consistently filling the Water Reservoir
with the optimum amount of water. filling the Water Reservoir with the optimum amount of water.
14.The Spray Bottle allows you to moisten fabrics before pressing, when helps to make the pressing
process easier and more effective in certain instances.
14.The Spray Bottle allows you to moisten fabrics before pressing, when helps to make the pressing
process easier and more effective in certain instances.
The Auto Shut- Off feature includes both an Auto Shot- Off and an Auto Wake-Up .These multiple
function safety features deactivate electrical power to the heater when the Pressing Plate has been
left closed against the Ironing Board for more than 10 seconds. Heater deactivation is signalled by a
beeping sound.Heater Functionality is restored when the Pressing Plate is raised back up. Power to
the heater will also be cut if the Pressing Plate is in the raised position without use for approximately
15 minutes(once again signaled by a beeping sound) The heating ability of the unit can only be restored
in this situation by pressing the Temperature Control Buttons.
The Auto Shut- Off feature includes both an Auto Shot- Off and an Auto Wake-Up .These multiple
function safety features deactivate electrical power to the heater when the Pressing Plate has been
left closed against the Ironing Board for more than 10 seconds. Heater deactivation is signalled by a
beeping sound.Heater Functionality is restored when the Pressing Plate is raised back up. Power to
the heater will also be cut if the Pressing Plate is in the raised position without use for approximately
15 minutes(once again signaled by a beeping sound) The heating ability of the unit can only be restored
in this situation by pressing the Temperature Control Buttons.
11.The Water Tank11.The Water Tank
ABOUT THE AUTO SHUT-OFFABOUT THE AUTO SHUT-OFF
GETTING TO KNOW YOUR STEAM PRESS GETTING TO KNOW YOUR STEAM PRESS
10.The Temperature Control Buttons are used to select a desired temperature by cycling through
the list of choices above the buttons. Push the Temperature Control Buttons until the indicator light
beneath the type of material you are going to press becomes illuminated.
10.The Temperature Control Buttons are used to select a desired temperature by cycling through
the list of choices above the buttons. Push the Temperature Control Buttons until the indicator light
beneath the type of material you are going to press becomes illuminated.
IMPORTANT: Auto Shut- Off does not mean that power to the unit is totally cut off. Power is always on,
and the Power Indicator Light will Remain illuminated until On/Off Switch is set to "Off"position.
IMPORTANT: Auto Shut- Off does not mean that power to the unit is totally cut off. Power is always on,
and the Power Indicator Light will Remain illuminated until On/Off Switch is set to "Off"position.
55