Instruction Manual
23
06
1
2
1 2
4
3
A
B
Medium to heavyweight fabric
Under side Under side
Under side Under side
Fine fabric
Top side
BLIND STITCH
fabrics or overcasting it on medium to heavyweight fabrics.
Then turn the hem up the required depth, press and pin in
place.
2. Now fold the fabric as illustrated.
3. Place the fabric under the foot. Turn the hand wheel counter
clockwise (toward you) by hand until the needle swings fully
to the left. It should just pierce the fold of the fabric. If it does
not, adjust the guide (B) on the Blind hem Foot (A) so that
the needle just pierces the fabric fold and the guide just rests
against the fold.
Sew slowly, guiding the fabric carefully along the edge of
the guide.
4. When completed, the stitching is almost invisible on the
right side of the fabric.
SETTINGS :Presser foot - Blind Hem Foot
-
Regular blind stitch for normal fabrics
-
Elastic blind stitch for soft, stretchable fabrics
NOTE: For a narrower or wider blind hem, first
manually adjust the length and width controls to
your desired length and width. Then adjust the
guide on the foot.
NOTE: It takes practice to sew blind hem. Always
MULTI-STITCH ZIGZAG
This is a strong stitch because as its name implies, it makes
three short stitches where the normal zig-zag makes only one.
For this reason, it is recommended for overcasting most types
of fabrics.
It is also ideal for mending tears, applying patches and
inserting elastic.
SETTINGS :Presser foot - All Purpose Foot
06
07