Instruction Manual

30
(A)
Spur
CORDED BUTTONHOLES
         
spur and pull both ends of the cord forward under the foot and
tie off the cord as shown in the illustration.
Sew buttonhole so that zigzag stitches cover the cord.
When completed, release the cord from the foot. Using a
hand sewing needle, bring the cords to the wrong side of the
fabric, then tie to secure. Trim the excess cords.
BUTTONHOLING WITH HARD-TO-SEW
FABRICS
When buttonholing with hard-to-sew fabrics or along the edge
of multi-layered garments, attach the underplate (A) onto the
buttonhole foot as illustrated to make perfect buttonholes.
Place the fabric between the underplate and buttonhole foot.
 
up the fabric in the center of the buttonhole.
Be careful not to cut any of the bartack threads.