Instruction manual

63
HELPFUL MESSAGES
Messages are displayed with LED lamps above stitch pattern numbers on control panel and/or PC screen. When a message is

On control panel
Problem
¼
Correction
Sewing Embroidery
Machine is locked up due to thread entangled with bobbin case or rotation interrupted forcibly.
Î
Turn off power switch and eliminate the problem that caused the machine to stop.

Bobbin winder is locked up due to thread entangled around spindle or rotation interrupted forcibly.
Î
Turn off power switch and eliminate the problem that caused the bobbin winder to stop.

Buttonhole is selected on selection button, but buttonhole lever is raised.
Î
Lower buttonhole lever and begin sewing buttonhole.

Buttonhole lever is not raised.
Î
Raise buttonhole lever when sewing stitch patterns or embroidery.

Foot control is connected while operating with start/stop button or start/stop button is pushed while
foot control is connected.
Î
Disconnect foot control or restart sewing by depressing foot control.

Foreign particle like tip of needle, screwdriver etc. is detected on machine socket for foot control.
Î
Remove foreign particle.