Manual

STRAIGHT STITCHING

For straight sewing on fine fabric

or very soft material, it is advisable

to use the straight stitch presser foot

and the straight stitch needle plate

which are included in your accessory

,J box. Both have narrow needle slots.

• Changing the Foot and Plate. To

' ■ « change presser foot i 22 Fig. 1 ' loosen thumb screw and

Fig. 15 remove zigzag foot. Replace with hinged straight foot

and tighten screw securely. Fig. 16

To change needle plate = 19 Fig. 1 > remove screw and lift off with cover plate attached.

Hold needle plate with left hand and cover plate with the right. i Fig. 15 >

Press upper corner of cover plate (right side upl down slightly and slip jnn from groove in

needle plate. Avoid using too much pressure. When the pm is released the two plates will

separate.

Attach cover plate to straight stitch plate by reversing the above procedure.

Slip pm on lower side of cover plate into groove on needle plate. Insert tongue into square

opening and slide upper pm into position. Put plates on machine and fasten securely with needle

plate screw.