Manual

REMOVING THE WORK

Be sure to stop the machine when the thread take-up lever and needle bar l°^^*ed at the

hiahest position Now raise the presser foot and draw the fabric back and to the e , g.

is 27, and pass ,ha threads over the thread cutter. Pull dowrr sl.ghtly holding thread rn both

hands, so as not to bend the, needle. Leave the ends of thread under the presser foot.

Fig. 26

Fig. 27

SETTING NEEDLE POSITION

The needle bar should be at its highest point when adjusting needle position to avoid tearing

levar to right, center or left for corresponding needle positions.